• Stainless Steel Braided Fuel Line Hose Rubber Flexible Rubber Hose Rubber Pressure Hose in 4AN 6AN 8AN 10AN 12AN

    Stainless Steel Braided Fuel Line Hose Rubber Flexible Rubber Hose Rubber Pressure Hose in 4AN 6AN 8AN 10AN 12AN

    Product information:

    Stainless Steel Braided Rubber Hose is made of 304 stainless steel wire and NBR/CPE synthetic rubber. The fuel line has good flame retardation and excellent corrosion resistance.  Best for oil, petrol, coolant, transmission fluid, hydraulic fluid, diesel, gas, vacuum etc. Widely used fuel systems, coolant system, vacuum applications. Compatible with most racing cars. Available size: 4AN 6AN 8AN 10AN 12AN 16AN We also accept the OEM/ODM service.

    Notice:

    Some tools should be prepared before cutting the braided hose

    1) Cutting wheel/ hack saw/ or steel braided hose cutters

    2) Duct tape or electrical tape (work best)

    Cutting and install:

    1. Measure your hose and find desired length

    2. Tape hose at measured length

    3. Cut hose through the tape you have placed (this help protect the braided steel from fraying)

    4. Remove the tape

    5. Slide one end of hose into the end of fitting

    6. Insert the other half of fitting into the hose, and then push and screw the fittings together

    7. Make sure the connection is tight

    About us:

    This is HaoFa Racing, we have engaged in hose manufacturing  over 6 years. We set up this site in order to help more people to find their satisfying products. We take customers’ benefit into consideration and by keeping abreast of the customers’ demanding we always improve our service and make sure the product quality. In addition, we also put emphasis on the product research and development for the purpose of satisfying our customers. From the very first beginning we just have the braided rubber hose, braided PTFE hose and brake hose, especially the brake hose has been sold well from our customers feedback. Encouraged by our customers, we gradually enrich our product catalog and improved step by step. Meanwhile we are dedicating to create a more healthy and competitive auto & motorcycle spare parts market environment.

     

  • HaoFa 6AN Braided Fuel Hose Oil Resistant Rubber Hose Fuel Line Hose for Auto Racing

    HaoFa 6AN Braided Fuel Hose Oil Resistant Rubber Hose Fuel Line Hose for Auto Racing

    About us:

    This is HaoFa Racing, we have engaged in hose manufacturing  over 6 years. We set up this site in order to help more people to find their satisfying products. We take customers’ benefit into consideration and by keeping abreast of the customers’ demanding we always improve our service and make sure the product quality. In addition, we also put emphasis on the product research and development for the purpose of satisfying our customers. From the very first beginning we just have the braided rubber hose, braided PTFE hose and brake hose, especially the brake hose has been sold well from our customers feedback. Encouraged by our customers, we gradually enrich our product catalog and improved step by step. Meanwhile we are dedicating to create a more healthy and competitive auto & motorcycle spare parts market environment.

    Product Introduction:

    High Pressure 6AN Rubber Fuel Hose Oil Line. The hose structure is made of quality nylon thread, 304 stainless steel mesh reinforced  and performance NBR/CPE synthetic rubber. The fuel line holds features of  good flame retardation, excellent corrosion resistance and oil resistance.  Best for oil, petrol, coolant, transmission fluid, hydraulic fluid, diesel, gas, vacuum etc. Widely used as fuel supply line, fuel return line, transmission oil cooler line. Please note it’s a universal fuel line, so it’s compatible with most cars including street vehicles, hot rod, street rod, truck, racing etc. Available size: 4AN 6AN 8AN 10AN 12AN 16AN We accept the customized service.

    Specification:

    Inner Diameter: 0.34”  (8.71mm)

    Outer Diameter: 0.56” (14.22mm)

    Working Pressure: 500PSI

    Bursting Pressure: 2000PSI

    Notice:

    Some tools should be prepared before cutting the braided hose

    1) Cutting wheel/ hack saw/ or steel braided hose cutters

    2) Duct tape or electrical tape (work best)

    1. Measure your hose and find desired length

    2. Tape hose at measured length

    3. Cut hose through the tape you have placed (this help protect the braided nylon from fraying)

    4. Remove the tape

     

  • HaoFa 8AN Nylon Braided Fuel Hose Oil Resistant Rubber Hose Fuel Line Hose for Auto Racing

    HaoFa 8AN Nylon Braided Fuel Hose Oil Resistant Rubber Hose Fuel Line Hose for Auto Racing

    Product information:

    The 8AN Rubber fuel hose oil line is made of nylon thread, stainless steel mesh and synthetic rubber material.  The hose works with oil, petrol, coolant, transmission fluid, hydraulic fluid, diesel, gas, vacuum etc. Widely used as fuel supply line, fuel return line, transmission oil cooler line. With strong wear resistance and flame retardant. It’s compatible to most car including the street vehicles, racing, hot rod, street rod, truck etc. Other Available size: 4AN 6AN 8AN 10AN 12AN 16AN  We also accept OEM/ODM service.

    Specification:

    Inner Diameter: 0.44”  (11.13mm)

    Outer Diameter: 0.68” (17.2mm)

    Working Pressure: 500PSI

    Bursting Pressure: 2000PSI

    Notice:

    Some tools should be prepared before cutting the braided hose

    1) Cutting wheel/ hack saw/ or steel braided hose cutters

    2) Duct tape or electrical tape (work best)

    Cutting steps:

    1. Measure your hose and find desired length

    2. Tape hose at measured length

    3. Cut hose through the tape you have placed (this help protect the braided nylon from fraying)

    4. Remove the tape

    About us:

    This is HaoFa Racing, we have engaged in hose manufacturing  over 6 years. We set up this site in order to help more people to find their satisfying products. We take customers’ benefit into consideration and by keeping abreast of the customers’ demanding we always improve our service and make sure the product quality. In addition, we also put emphasis on the product research and development for the purpose of satisfying our customers. From the very first beginning we just have the braided rubber hose, braided PTFE hose and brake hose, especially the brake hose has been sold well from our customers feedback. Encouraged by our customers, we gradually enrich our product catalog and improved step by step. Meanwhile we are dedicating to create a more healthy and competitive auto & motorcycle spare parts market environment.

     

  • HaoFa 10AN Nylon Braided Fuel Hose Oil Resistant Rubber Hose Fuel Line Hose for Auto Racing

    HaoFa 10AN Nylon Braided Fuel Hose Oil Resistant Rubber Hose Fuel Line Hose for Auto Racing

    About us:

    HaoFa Racing is one of  professional auto spare parts suppliers, we own our factory. With an aim to assist more people to find their satisfying products we built up this site. We take customers’ benefit into consideration and by keeping abreast of the customers’ demanding.  We continuously  improve our service and make sure the product quality. In addition, we also put emphasis on the product research and development for the purpose of satisfying our customers. From the very first beginning we provide the braided rubber hose, braided PTFE hose and brake hose, especially the brake hose has been sold well from our customers feedback. Encouraged by our customers, we gradually expand our product range, we provide oil cooler, oil catch can, oil sandwich pate, a series of hose fittings and so on. Meanwhile we are dedicating to create a more healthy and competitive auto & motorcycle spare parts market environment.

    Product information:

    10AN Rubber Hose is made of nylon thread, stainless steel mesh and synthetic rubber material.  The hose is compatible with oil, petrol, coolant, transmission fluid, hydraulic fluid, diesel, gas, vacuum etc. Widely used as fuel supply line, fuel return line, transmission oil cooler line. Available size: 4AN 6AN 8AN 10AN 12AN 16AN

    Specification:

    Inner Diameter: 9/16” (14.3mm)

    Working Pressure: 500PSI

    Bursting Pressure: 2000PSI

    Notice:

    some tools are recommended to be prepared before cutting the braided hose

    1) Cutting wheel/ hack saw/ or steel braided hose cutters

    2) Duct tape or electrical tape (work best)

    Cutting and install:

    1. Measure your hose and make sure the desired length

    2. Tape the hose at measured length

    3. Cut hose through the tape you have stuck place (this keep braided nylon from fraying)

    4. Remove the tape

    5. Slide one end of hose into the end of adapter

    6. Insert the other half of  adapter into the hose, and then push and screw the adapters together

    7. Make sure the connection is tight