About us:
HaoFa Racing is one of professional auto spare parts suppliers, we own our factory. With an aim to assist more people to find their satisfying products we built up this site. We take customers’ benefit into consideration and by keeping abreast of the customers’ demanding. We continuously improve our service and make sure the product quality. In addition, we also put emphasis on the product research and development for the purpose of satisfying our customers. From the very first beginning we provide the braided rubber hose, braided PTFE hose and brake hose, especially the brake hose has been sold well from our customers feedback. Encouraged by our customers, we gradually expand our product range, we provide oil cooler, oil catch can, oil sandwich pate, a series of hose fittings and so on. Meanwhile we are dedicating to create a more healthy and competitive auto & motorcycle spare parts market environment.
Product information:
10AN Rubber Hose is made of nylon thread, stainless steel mesh and synthetic rubber material. The hose is compatible with oil, petrol, coolant, transmission fluid, hydraulic fluid, diesel, gas, vacuum etc. Widely used as fuel supply line, fuel return line, transmission oil cooler line. Available size: 4AN 6AN 8AN 10AN 12AN 16AN
Specification:
Inner Diameter: 9/16” (14.3mm)
Working Pressure: 500PSI
Bursting Pressure: 2000PSI
Notice:
some tools are recommended to be prepared before cutting the braided hose
1) Cutting wheel/ hack saw/ or steel braided hose cutters
2) Duct tape or electrical tape (work best)
Cutting and install:
1. Measure your hose and make sure the desired length
2. Tape the hose at measured length
3. Cut hose through the tape you have stuck place (this keep braided nylon from fraying)
4. Remove the tape
5. Slide one end of hose into the end of adapter
6. Insert the other half of adapter into the hose, and then push and screw the adapters together
7. Make sure the connection is tight
