10AN Nylon braided PTFE fuel hose is made of nylon thread, stainless steel mesh and PTFE inner tube, which is ideal for high pressure, high temperature, and providing wide range of fluid compatibility. The hose can be used as fuel return line, turbo oil feed and boost line, transmission oil cooler hose, EFI line etc. Apply to fuel, petrol, oil, gas, E85 fuel, water etc. Suitable to most racing autos and motorcycles.
ID: 0.5” (12.95mm)
Work Temperature: -60~ 260℃
Some tools should be prepared before cutting the braided hose
1) Cutting wheel/ hack saw/ or steel braided hose cutters
2) Duct tape or electrical tape (work best)
Cutting and install:
1. Measure your hose and find desired length
2. Tape hose at measured length
3. Cut hose through the tape you have placed (this help protect the braided nylon from fraying)
4. Remove the tape
5. Slide one end of hose into the end of fitting
6. Insert the other half of fitting into the hose, and then push and screw the fittings together
7. Make sure the connection is tight
This is HaoFa Racing, we have engaged in hose manufacturing over 6 years. We set up this site in order to help more people to find their satisfying products. We take customers’ benefit into consideration and by keeping abreast of the customers’ demanding we always improve our service and make sure the product quality. In addition, we also put emphasis on the product research and development for the purpose of satisfying our customers. From the very first beginning we just have the braided rubber hose, braided PTFE hose and brake hose, especially the brake hose has been sold well from our customers feedback. Encouraged by our customers, we gradually enrich our product catalog and improved step by step. Meanwhile we are dedicating to create a more healthy and competitive auto & motorcycle spare parts market environment.