Product information:

The 8AN Rubber fuel hose oil line is made of nylon thread, stainless steel mesh and synthetic rubber material.  The hose works with oil, petrol, coolant, transmission fluid, hydraulic fluid, diesel, gas, vacuum etc. Widely used as fuel supply line, fuel return line, transmission oil cooler line. With strong wear resistance and flame retardant. It’s compatible to most car including the street vehicles, racing, hot rod, street rod, truck etc. Other Available size: 4AN 6AN 8AN 10AN 12AN 16AN  We also accept OEM/ODM service.

Specification：

Inner Diameter: 0.44”  (11.13mm)

Outer Diameter: 0.68” (17.2mm)

Working Pressure: 500PSI

Bursting Pressure: 2000PSI

Notice:

Some tools should be prepared before cutting the braided hose

1) Cutting wheel/ hack saw/ or steel braided hose cutters

2) Duct tape or electrical tape (work best)

Cutting steps:

1. Measure your hose and find desired length

2. Tape hose at measured length

3. Cut hose through the tape you have placed (this help protect the braided nylon from fraying)

4. Remove the tape

About us:

This is HaoFa Racing, we have engaged in hose manufacturing  over 6 years. We set up this site in order to help more people to find their satisfying products. We take customers’ benefit into consideration and by keeping abreast of the customers’ demanding we always improve our service and make sure the product quality. In addition, we also put emphasis on the product research and development for the purpose of satisfying our customers. From the very first beginning we just have the braided rubber hose, braided PTFE hose and brake hose, especially the brake hose has been sold well from our customers feedback. Encouraged by our customers, we gradually enrich our product catalog and improved step by step. Meanwhile we are dedicating to create a more healthy and competitive auto & motorcycle spare parts market environment.