Product Introduction:

High Pressure Rubber Fuel Hose Oil Line. The hose structure is made of quality nylon thread, 304 stainless steel mesh reinforced  and performance NBR/CPE synthetic rubber. The fuel line holds features of  good flame retardation, excellent corrosion resistance and oil resistance.  Best for oil, petrol, coolant, transmission fluid, hydraulic fluid, diesel, gas, vacuum etc. Widely used as fuel supply line, fuel return line, transmission oil cooler line. Please note it’s a universal fuel line, so it’s compatible with most cars including street vehicles, hot rod, street rod, truck, racing etc. Available size: 4AN 6AN 8AN 10AN 12AN 16AN 20AN We accept the customized service.

Specification：

Inner Diameter: 0.34”  (8.71mm)

Outer Diameter: 0.56” (14.22mm)

Working Pressure: 500PSI

Bursting Pressure: 2000PSI

Notice:

Some tools should be prepared before cutting the braided hose

1) Cutting wheel/ hack saw/ or steel braided hose cutters

2) Duct tape or electrical tape (work best)

1. Measure your hose and find desired length

2. Tape hose at measured length

3. Cut hose through the tape you have placed (this help protect the braided nylon from fraying)

4. Remove the tape