Product information:

The 6AN PTFE hose is made of stainless steel mesh and ptfe inner tube. With features of anti abrasion, oil and heat resistance, waterproof, flame retardant, high strength, resuable. Especially friendly to E85 fuel.  It’s generally used for gauge lines, vacuum lines, fuel return lines, fuel, oil, transmission. Work perfectly with PTFE hose end fittings. The hose is easy to install and replace. Each product has passed strict inspection in order to provide our customer trouble -free experience. The hose has widely used to most racing, hot rod, street rod, refitted cars. Hose size and hose length are accepted the customer services.

Specification:

Inner Diameter: 5/16” (8.1mm)

Working Temperature: -60-260℃

Working Pressure: 3000 PSI

Bursting Pressure: 10000 PSI

Notice:

Some tools should be prepared before cutting the braided hose

1) Cutting wheel/ hack saw/ or steel braided hose cutters

2) Duct tape or electrical tape (work best)

Cutting:

1. Measure your hose and find desired length

2. Tape hose at measured length

3. Cut hose through the tape you have placed (this help protect the braided steel from fraying)

4. Remove the tape